• Sil-Pad
  • Sil-Pad 400
  • Sil-Pad 800
  • Sil-Pad 900S
  • Sil-Pad 980
  • Sil-Pad 1100ST
  • Sil-Pad 1200
  • Sil-Pad A1500
  • Sil-Pad 1500ST
  • Sil-Pad 2000
  • Sil-Pad A2000
  • Sil-Pad K-4
  • Sil-Pad K-6
  • Sil-Pad K-10
  • Q-Pad II
  • Q-Pad 3
  • Poly-Pad 400
  • Poly-Pad 1000
  • Poly-Pad K-4
  • Poly-Pad K-10
  • Sil-Pad Tube
  • Sil-Pad Shield
  •  
• Gap Pad
  • Gap Pad VO
  • Gap Pad VO Soft
  • Gap Pad VO Ultra Soft
  • Gap Pad VO Ultra Soft-B
  • Gap Pad VO Ultimate
  • Gap Pad 1000SF
  • Gap Pad HC1000
  • Gap Pad 1500
  • Gap Pad 1500R
  • Gap Pad 1500S30
  • Gap Pad A2000
  • Gap Pad 2000S40
  • Gap Pad 2200SF
  • Gap Pad 2500S20
  • Gap Pad 2500
  • Gap Pad A3000
  • Gap Pad 3000S30
  • Gap Pad 5000S35
  • Gap Filler 1000
  • Gap Filler 1000SR
  • Gap Filler 1100SF
  • Gap Filler 1500
  • Gap Filler 2000
  • Gap Filler 3500S35
• Bond-Ply
  • Bond-Ply 100
  • Bond-Ply 400
  • Bond-Ply 660P
  • Liqui-Bond SA 1000
  • Liqui-Bond SA 1800
  • Liqui-Bond SA 2000
• Hi-Flow Phase Change
  • Hi-Flow 105
  • Hi-Flow 225F-AC
  • Hi-Flow 225UT
  • Hi-Flow 225U
  • Hi-Flow 625
  • Hi-Flow 300P
  • Hi-Flow 300G
  • Hi-Flow 565U
  • Hi-Flow 565UT
  • Hi-Flow 650P
  • TIC 1000A
  • TIC 4000
• Liquid Dispensed Materials
  • Gap Filler 1000
  • Gap Filler 1000SR
  • Gap Filler 1100SF
  • Gap Filler 1500
  • Gap Filler 2000
  • Gap Filler 3500S35
  • Liqui-Bond SA 1000
  • Liqui-Bond SA 1800
  • Liqui-Bond SA 2000
  • TIC 1000A
  • TIC 4000
• Thermal Properties and Testing
• Awards and Certifications
• Selection Guide and Comparison Tables
• Compare Material Properties
• Part Number Builder
• LED Solutions Brochure
• Compression Deflection Contour Plots

BP100

High performance, thermally conductive acrylic adhesive

Bond-Ply 450

Bond-Ply 450

Downloads
Selection Guide
Data Sheet
RoHS Certificate

• Thermal performance:
  0.87°C-in2/W (@50 psi)
• Pre-applied and exclusively available
  on Bergquist T-Clad
• Eliminates future adhesive assembly
  requirements
  
• Withstands reflow processing

Bond-Ply 450 is an un-reinforced, thermally conductive, pressure sensitive adhesive tape. The tape is exclusively available pre-applied to Bergquist T-Clad circuits and features a back side release liner. Bond-Ply 450 is designed to withstand the high temperatures associated with solder reflow without degradation of adhesion or liner release characteristics.The material is designed to attain high bond strength to a variety of “low energy” surfaces, including aluminum heat sinks and many plastics, while maintaining high bond strength with long term exposure to heat and high humidity..

Typical Applications Include

Secure:

• Bergquist manufactured LED T-Clad circuits for architectural, automotive, medical, military, signage, signal, transportation, security, aircraft, portable and theatrical lighting
• Bergquist manufactured IMS “Power Rails” to heat sink
• Bergquist manufactured IMS custom circuits mounted to heat sinks and enclosures