• Sil-Pad
  • Sil-Pad 400
  • Sil-Pad 800
  • Sil-Pad 900S
  • Sil-Pad 980
  • Sil-Pad 1100ST
  • Sil-Pad 1200
  • Sil-Pad A1500
  • Sil-Pad 1500ST
  • Sil-Pad 2000
  • Sil-Pad A2000
  • Sil-Pad K-4
  • Sil-Pad K-6
  • Sil-Pad K-10
  • Q-Pad II
  • Q-Pad 3
  • Poly-Pad 400
  • Poly-Pad 1000
  • Poly-Pad K-4
  • Poly-Pad K-10
  • Sil-Pad Tube
  • Sil-Pad Shield
  •  
• Gap Pad
  • Gap Pad VO
  • Gap Pad VO Soft
  • Gap Pad VO Ultra Soft
  • Gap Pad VO Ultra Soft-B
  • Gap Pad VO Ultimate
  • Gap Pad 1000SF
  • Gap Pad HC1000
  • Gap Pad 1500
  • Gap Pad 1500R
  • Gap Pad 1500S30
  • Gap Pad A2000
  • Gap Pad 2000S40
  • Gap Pad 2200SF
  • Gap Pad 2500S20
  • Gap Pad 2500
  • Gap Pad A3000
  • Gap Pad 3000S30
  • Gap Pad 5000S35
  • Gap Filler 1000
  • Gap Filler 1000SR
  • Gap Filler 1100SF
  • Gap Filler 1500
  • Gap Filler 2000
  • Gap Filler 3500S35
• Bond-Ply
  • Bond-Ply 100
  • Bond-Ply 400
  • Bond-Ply 660P
  • Bond-Ply LMS500P
  • Liqui-Bond SA 1000
  • Liqui-Bond SA 1800
  • Liqui-Bond SA 2000
• Hi-Flow Phase Change
  • Hi-Flow 105
  • Hi-Flow 225F-AC
  • Hi-Flow 225UT
  • Hi-Flow 225U
  • Hi-Flow 625
  • Hi-Flow 300P
  • Hi-Flow 300G
  • Hi-Flow 565U
  • Hi-Flow 565UT
  • Hi-Flow 650P
  • TIC 1000A
  • TIC 4000
• Liquid Dispensed Materials
  • Gap Filler 1000
  • Gap Filler 1000SR
  • Gap Filler 1100SF
  • Gap Filler 1500
  • Gap Filler 2000
  • Gap Filler 3500S35
  • Liqui-Bond SA 1000
  • Liqui-Bond SA 1800
  • Liqui-Bond SA 2000
  • TIC 1000A
  • TIC 4000
• Thermal Properties and Testing
• Awards and Certifications
• Selection Guide and Comparison Tables
• Compare Material Properties
• Part Number Builder
• LED Solutions Brochure
• Compression Deflection Contour Plots

BP100

High performance, thermally conductive acrylic adhesive

Bond-Ply 450

Bond-Ply 450

Downloads
Selection Guide
Data Sheet
RoHS Certificate

• Question:What is the primary difference between the Bond-Ply 660B and Bond-Ply 100 products?
  
  Answer: Bond-Ply 660B utilizes a dielectric film, replacing the fiberglass inherent in our Bond-Ply 100 series products. The addition of the film allows for high dielectric performance without additional product thickness.
  
  
• Question: How should I size my interface dimensions for Bond-Ply?
  
  Answer: Bond-Ply product testing has been completed on various interface materials. These tests have demonstrated that improper surface wet-out is the single largest variable associated with maximizing bond strength and heat transfer. Bergquist has found that reducing the size of the interface pad to roughly 80% of the total interface area actually improves the overall bonding performance while offering significant improvements in total package cooling. Bergquist offers three standard thicknesses for Bond-Ply 100 allowing each application to be optimized in three dimensions.
  
  
• Question: What application pressure is required to optimize bond strength with Bond-Ply?
  
  Answer: The answer to this varies from application to application, depending upon surface roughness and flatness. In general, pressure, temperature, and time are the primary variables associated with increasing surface contact or wet-out. Increasing the application time and/or pressure will significantly increase surface contact. Natural wet-out will continue to occur with Bond-Ply materials. This inherent action often increases bond strength by more than 2x within the first 24 hours.
  
  
• Question:Will Bond-Ply adhere to plastic packages?
  
  Answer: Adhesive performance on plastic packages is primarily a function of surface contact or wet-out. If surface contaminants such as plastic mold release oils are present, this will prevent contact and/or bonding to the surface. Make sure all surfaces are clean and dry prior to applying Bond-Ply materials.
  
  
• Question: How are one-part Liqui-Bond adhesives cured?
  
  Answer: Liqui-Bond SA 2000 requires heat to cure and bond in the application. Altering the bond line temperature and time can control the cure schedule. The components should not be moved during the curing process.
  
  
• Question: What is ISO9001:2000?
  
  Answer: The ISO certification is the adoption of a quality management system that is a strategic decision of the organization. This International Standard specifies requirements for a quality management system where an organization: a) needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and b) aims to enhance customer satisfaction through the effective application if the system, including processes for continual improvement of the system and the assurance of conformity to customer and regulatory requirements.