Bond-Ply 660B

Bond-Ply 660B

Downloads
Selection Guide
Data Sheet
RoHS Certificate

Typical Properties of Bond-Ply 660B
Property	Imperial Value	Metric Value	Test Method
Color	White	White	Visual
Reinforcement Carrier	Film	Film	***
Thickness (inch) / (mm)	0.0055	0.14	ASTM D374
Temp. Resistance, 30 sec. (ºF) / (ºC)	392	200	***
Elongation (%45º to Warp & Fill)	40	40	ASTM D412
Tensile Strength (psi) / (MPa)	30000	210	ASTM D412
CTE (ppm)	250	250	ASTM D3386
Glass Transition (ºF) / (ºC)	-22	-30	ASTM 1356
Continuous Use Temp. (ºF) / (ºC)	-22 to 248	-30 to 120	***
Adhesion
Lap Shear @ RT (psi) / (MPa)	100	0.7	ASTM D1002
Lap Shear after 5 hr. @ 100ºC	200	1.4	ASTM D1002
Lap Shear after 2 hr. @ 200ºC	200	1.4	ASTM D1002
Static Dead Weight Shear (ºF) / (ºC)	302	150	PSTC #7
Electrical
Dielectric Breakdown Voltage (Vac)	7000	7000	ASTM D149
Flame Rating	V-O	V-O	U.L. 94
Thermal
Thermal Conductivity (W/m-K)	0.4	0.4	ASTM D5470
Thermal Impedance v Pressure

Pressure (psi)	10	25	50	100	200
TO-220 Thermal Performance (°C/W)	5.30	4.94	4.38	4.02	3.88
Thermal Impedance (°C-in2/W) (1)	1.15	0.79	0.74	0.72	0.70
1). The ASTM D5470 test fixture was used. The recorded value includes interfacial thermal resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied.