Liqui-Bond SA 1800 is a high performance, liquid silicone adhesive that cures to a solid bonding elastomer.

Gap Filler 1000

Gap Filler 1000 (Two-Part)

Downloads
Selection Guide
Data Sheet
RoHS Certificate
Halogen Testing Report

Typical Properties of Gap Filler 1000
Property	Imperial Value	Metric Value	Test Method
Color / Part A	Gray	Gray	Visual
Color / Part B	White	White	Visual
Viscosity as Mixed (cps) (1)	100,000	100,000	ASTM D2196
Density (g/cc)	1.6	1.6	ASTM D792
Mix Ratio	1:1	1:1	***
Shelf Life @ 25ºC (months)	6	6	***
Property As Cured
Color	Gray	Gray	Visual
Hardness (Shore 00) (2)	30	30	ASTM D2240
Heat Capacity (J/g-K)	1.0	1.0	ASTM E1269
Continuous Use Temp (°F) / (°C)	-76 to 347	-60 to 175	***
Electrical
Dielectric Strength (V/mil)	500	500	ASTM D149
Dielectric Constant (1000 Hz)	5.0	5.0	ASTM D150
Volume Resistivity (Ohm-meter)	10¹¹	10¹¹	ASTM D257
Flame Rating	V-O	V-O	U.L. 94
Thermal As Cured
Thermal Conductivity (W/m-K)	1.0	1.0	ASTM D5470
CURE SCHEDULE
Pot Life @ 25ºC (min) (3)	15	15	***
Cure @ 25ºC (min) (4)	60-120	60-120	***
Cure @ 100ºC (min) (4)	5	5	***
1) Brookfield RV, Heli-Path, Spindle TF @ 20 rpm, 25°C 2) Thirty second delay value Shore 00 hardness scale 3) Time for viscosity to double 4) Cure schedule (rheometer - time to read 90% cure)