Liqui-Bond SA 1800 is a high performance, liquid silicone adhesive that cures to a solid bonding elastomer.

Gap Filler 1100SF

Gap Filler 1100 SF
(Two-Part)

Downloads
Selection Guide
Data Sheet
RoHS Certificate
Halogen Testing Report

Typical Properties of Gap Filler 1100 SF
Property	Imperial Value	Metric Value	Test Method
Color / Part A	Yellow	Yellow	Visual
Color / Part B	Red	Red	Visual
Viscosity as Mixed (cps) (1)	450,000	450,000	ASTM D2196
Density (g/cc)	2.0	2.0	ASTM D792
Mix Ratio	1:1	1:1	***
Shelf Life @ 25ºC (months)	6	6	***
Property As Cured
Color	Orange	Orange	Visual
Hardness (Shore 00) (2)	60	60	ASTM D2240
Heat Capacity (J/g-K)	0.9	0.9	ASTM E1269
Continuous Use Temp (°F) / (°C)	-76 to 257	-60 to 125	***
Electrical
Dielectric Strength (V/mil)	400	400	ASTM D149
Dielectric Constant (1000 Hz)	5.0	5.0	ASTM D150
Volume Resistivity (Ohm-meter)	10¹⁰	10¹⁰	ASTM D257
Flame Rating	V-O	V-O	U.L. 94
Thermal As Cured
Thermal Conductivity (W/m-K)	1.1	1.1	ASTM D5470
CURE SCHEDULE
Pot Life @ 25ºC (min) (3)	240 min (4 hr)	240 min (4 hr)	***
Cure @ 25ºC (min) (4)	24	24	***
Cure @ 100ºC (min) (4)	10	10	***
1) Brookfield RV, Heli-Path, Spindle TF @ 2 rpm, 25°C 2) Thirty second delay value Shore 00 hardness scale 3) Time for viscosity to double 4) Cure schedule (rheometer - time to read 90% cure)