• Sil-Pad
  • Sil-Pad 400 (7 mil)
  • Sil-Pad 400 (9 mil)
  • Sil-Pad 800
  • Sil-Pad 900S
  • Sil-Pad 980
  • Sil-Pad 1100ST
  • Sil-Pad 1200
  • Sil-Pad A1500
  • Sil-Pad 1500ST
  • Sil-Pad 1750
  • Sil-Pad 2000 (10 mil)
  • Sil-Pad A2000 (15 mil)
  • Sil-Pad A2000 (20 mil)
  • Sil-Pad K-4
  • Sil-Pad K-6
  • Sil-Pad K-10
  • Q-Pad II
  • Q-Pad 3
  • Poly-Pad 1000
  • Poly-Pad K-4
  • Poly-Pad K-10
  • Sil-Pad Tube
  • Sil-Pad Shield
  •  
• Gap Pad
  • Gap Pad VO
  • Gap Pad VO Soft
  • Gap Pad VO Ultra Soft
  • Gap Pad 1000SF
  • Gap Pad 2200SF
  • Gap Pad HC1000
  • Gap Pad 1500
  • Gap Pad 1500R
  • Gap Pad 1500S30
  • Gap Pad A2000
  • Gap Pad 2000S40
  • Gap Pad 2500S20
  • Gap Pad 2500
  • Gap Pad A3000
  • Gap Pad 3000S30
  • Gap Pad 5000S35
  • Gap Filler 1000
  • Gap Filler 1100 SF
  • Gap Filler 2000
  • Gap Filler 1500
  • Gap Filler 3500S35
  •  
• Bond-Ply
  • Bond-Ply 100 (5 mil)
  • Bond-Ply 100 (8 mil)
  • Bond-Ply 100 (11 mil)
  • Bond-Ply 400
  • Bond-Ply 450
  • Bond-Ply 660B
  • Bond-Ply 660P
  • Liqui Bond SA 1000
  • Liqui-Bond SA 1800
  • Liqui Bond SA 2000
• Hi-Flow Phase Change
  • Hi-Flow 105
  • Hi-Flow 225
  • Hi-Flow 225FT
  • Hi-Flow 225UT
  • Hi-Flow 225U
  • Hi-Flow 565U
  • Hi-Flow 565UT
  • Hi-Flow 625
  • Hi-Flow 300P
  • Hi-Flow 300G
  • Hi-Flow 330P
  • TIC 1000A
  • TIC 4000
  •  
• Liquid Dispensed Materials
  • Gap Filler 1000
  • Gap Filler 1100SF
  • Gap Filler 1500
  • Gap Filler 2000
  • Gap Filler 3500S35
  • Liqui-Bond SA 1000
  • Liqui-Bond SA 1800
  • Liqui-Bond SA 2000
  • TIC 1000A
  • TIC 4000
• Thermal Properties and Testing
• Awards and Certifications
• Selection Guide and Comparison Tables
• Compare Material Properties
• Part Number Builder
• LED Solutions Brochure
• Compression Deflection Estimator

GP1500S30

Gap Pad 1500S30 is a highly compliant material that is ideal for fragile component leads.

Compression Deflection Estimator

We hope you'll find this compression deflection estimator useful, however due to factors like surface friction, boundary conditions, geometric areas, temperature, and rate of compression; it is important to always test and determine the correct material for your application.

Choose your Material * Gap Pad VO Ultra Soft Gap Pad VO Soft Gap Pad VO Gap Pad 1000 SF Gap Pad HC1000 Gap Pad 1500 Gap Pad 1500R Gap Pad 1500S30 Gap Pad A2000 Gap Pad 2000S40 Gap Pad 2200SF Gap Pad 2500S20 Gap Pad 2500 Gap Pad A3000 Gap Pad 3000S30 Gap Pad 5000S35   Enter Percent Deflection, 25% = .25     Enter Area (in2)     Pressure (in lbs)=

* Young's Modulus, calculated using 0.01 in/min. step rate of strain with a sample size of 0.79 inch2. For more information on Gap Pad modulus, refer to Bergquist Application Note #116.