Gap Pad 1500S30 is a highly compliant material that is ideal for fragile component leads.

Gap Pad 2200SF

Gap Pad 2200SF

Downloads
Selection Guide
Data Sheet
RoHS Certificate
RoHS Certificate (CofC)
MSDS English
MSDS Deutsch

Typical Properties of Gap Pad 2200SF
Property	Imperial Value	Metric Value	Test Method
Color	Green	Green	Visual
Reinforcement Carrier	Fiberglass	Fiberglass	***
Thickness (inch) / (mm)	0.010 to 0.125	0.254 to 3.175	ASTM D374
Inherent Surface Tack (1 or 2 sided)	2	2	***
Density (g/cc)	2.8	2.8	ASTM D792
Heat Capacity (J/g-K)	1.0	1.0	ASTM E1269
Hardness, Bulk Rubber (Shore 00) (1)	70	70	ASTM D2240
Young's Modulus (psi) / (kPa) (2)	33	228	ASTM D575
Continuous Use Temp (°F) / (°C)	-76 to 257	-60 to 125	***
Electrical
Dielectric Breakdown Voltage (Vac)	>5000	>5000	ASTM D149
Dielectric Constant (1000 Hz)	6.0	6.0	ASTM D150
Volume Resistivity (Ohm-meter)	10⁸	10⁸	ASTM D257
Flame Rating	V-O	V-O	U.L. 94
Thermal
Thermal Conductivity (W/m-K)	2.0	2.0	ASTM D5470
1) Thirty second delay value Shore 00 hardness scale. 2) Young's Modulus, calculated using 0.01 in/min. step rate of strain with a sample size of 0.79 inch2. For more information on Gap Pad modulus, refer to Bergquist Application Note #116.